Products
Note: For preventive purposes, it is worth installing the emulator even if the steering lock error has not yet occurred! It can be extremely annoying and very expensive if the steering wheel cannot be unlocked after refueling on the highway or during a trip abroad. Sooner or later, the steering lock mechanism will definitely break down. The only questions are when and where.
TRACKED SHIPPING FROM OUR UK, US, OR EU WAREHOUSE IS FREE!
(There are no customs fees for the UK, US, or EU! – shipping time is 1-5 workdays.)
ELV emulator & ELV error counter RESET tool for BMW E-series and also for Mini R55, R56, & R57. Quickly resolve ELV module problems. The emulator simulates a perfectly working ELV for the CAS. The RESET tool unlocks the steering and re-enables the starting of your car. If your car is in a non-crank non-start condition or the steering cannot be unlocked, you will need this tool too. Thus, there are no more check control messages and your BMW starts again.
Advantages against other ELV emulators include:
– ORIGINAL QUALITY EU PRODUCT. ALL OF OUR PRODUCTS OFFER A LIFETIME WARRANTY! BUILT TO LAST A LIFETIME.
– If the steering cannot be unlocked, you can unlock it with our RESET tool.
– Can only be plugged in one way. This eliminates the guesswork about pin connections. INCLUDES A PERFECT FIT PLUG TYPE!
– Money back guarantee for 30 days.
– Uniquely on the market, it is equipped with an RGB diagnostic LED, the operation of which can be found in the FAQ menu.
– A protective plastic case is included, preventing short circuits, dust, condensation, and mechanical damage.
– A longer connector cable, which provides easier placement and installation.
– Also works with 3 and 4 pin ELV modules.
– Plug and play, no additional programming necessary.
If the electronic steering wheel lock on your BMW E-series or MINI is faulty, the emulator can easily fix the problem. Ignoring the fault will lead to the steering locking you out and resulting in a non-start of your car. Of course, BMW Workshop wants to replace the entire steering column in this case.
Installation of the emulator is quick and simple:
Watch our installation videos, which show step-by-step how to use our devices. Push the key FOB into the slot. This will unlock the steering. Ignition is not required. If your steering cannot be unlocked, please use our RESET tool first. Remove the trim panel under the steering column (Depending on the model, 3 or 4 screws). Disconnect the 3 or 4 pin plug from your ELV unit. It is located approximately in the middle of the steering column. Plug the car connector into the emulator and start the car. After the installation of the ELV emulator, the vehicle has no more errors and starts normally.